Velonix Mobile Energy Storage Charging Trailer — 1000 kWh Class

Product Positioning

A trailer-mounted, containerized energy storage system designed to deliver on-demand mobile power and temporary EV charging capacity for sites where the grid is unavailable, constrained, or too slow to upgrade.

1) Core Specifications (Typical / Configurable)

Energy Storage

• Battery Energy (Nominal): 1000 kWh

• Battery Type: LFP (LiFePO₄) or equivalent (Configurable)

• Battery Management: Integrated BMS with cell monitoring, balancing, alarms, and protection

Power Output (Configurable by Project)

• DC Fast Charging Output: Configurable (TBC)

• Typical options: 480 kW/720kw

• DC Output Voltage Range: Configurable (TBC)

• Typical: 200–750 V or 200–1000 V

• Charging Guns / Connectors: Configurable

• Options: CCS2 / CCS1 / NACS / GB/T / CHAdeMO

• Single or dual-gun output available

AC Power Output (Optional)

• AC Output: 3-phase AC (Configurable, TBC)

• Use: Site power for tools, lighting, offices, auxiliary loads

Charging / Recharging Inputs (Optional)

• Grid Charging Input: Available (TBC by configuration)

• Generator Input: Optional

• PV / Renewable Input: Optional (via PCS/EMS design)

Control, Monitoring & Connectivity (Configurable)

• EMS (Energy Management System): SOC/SOH, power dispatch, alarms, logs

• Connectivity: Ethernet / Wi-Fi / 4G (optional)

• Protocol Options: OCPP (if EV charging operation needed), Modbus TCP/RTU (for energy integration) — Configurable

Environmental & Protection (Typical)

• Enclosure Protection: Typically IP54 (Configurable)

• Operating Temperature: Configurable (Typical: -20°C to +55°C)

• Cooling: Forced air / HVAC (TBC by power level and climate)

Mobility & Structure

• Form Factor: Trailer-mounted container system

• Deployment: Park-and-use, minimal civil works, fast commissioning

Warranty (Configurable)

• Typical system warranty can be 2–5 years depending on battery brand and warranty terms (TBC)

2) Standard Safety & Protection Functions (Typical)

• Over/under voltage, over current, short circuit protection

• Insulation monitoring & grounding protection

• Overtemperature protection (battery + power electronics)

• Emergency stop, fault isolation, event logging

• Optional: fire detection/suppression package (project-dependent)

3) Application Scenarios (Where This Product Wins)

A. Construction Sites (Your Image Scenario)

Problem: No permanent grid, or grid connection is late/insufficient; diesel generators are noisy and expensive.
Velonix Solution:

• Temporary power for tools, lighting, site offices

• On-site charging for EV pickup trucks, vans, and electrified equipment

• Reduced fuel logistics, noise, and emissions at the jobsite

B. Grid-Constrained EV Charging Expansion (Depot / Public Sites)

Problem: Transformer upgrade takes months; demand spikes cause power limits.
Velonix Solution:

• Add instant charging capacity without grid expansion

• Use as buffer storage for peak shaving and demand charge reduction

• Ideal for fleet depots, logistics hubs, taxi yards, bus stations

C. Emergency Power & Disaster Response

Problem: Outages or disasters require rapid power restoration.
Velonix Solution:

• Mobile backup power for critical loads

• Support temporary charging for emergency EV fleets

• Deployable to any location with minimal setup

D. Ports, Mining, Remote Industrial Sites

Problem: Remote operations need reliable power and increasing electrification.
Velonix Solution:

• Clean mobile power for remote yards

• Charging support for electric machinery and service vehicles

• Reduce diesel dependency and operational interruptions

E. Events, Temporary Venues, Film Production

Problem: Temporary sites need silent, reliable power.
Velonix Solution:

• Low-noise, stable energy supply

• Supports temporary EV charging for staff and logistics vehicles

Tags: mobile ev charge station