Products Description
Velonix Mobile Energy Storage + DC Fast Charging System
Configuration: 100 kWh battery + 90 kW DC output (All-in-one)
1) System Overview
The Velonix 100 kWh / 90 kW unit is an integrated mobile energy storage charging system that combines LFP battery storage + PCS/EMS + DC fast charging in one compact cabinet. It is designed for off-grid / weak-grid scenarios, temporary charging deployments, fleet support, and emergency power applications.
2) Key Specifications
Energy Storage
Battery Capacity (Nominal): 100 kWh
Battery Chemistry: LFP (LiFePO₄)
Battery Management: Integrated BMS (cell monitoring, balancing, protections, alarms)
DC Fast Charging Output
Rated Output Power: 90 kW (DC)
Output Voltage Range: 200–750 V DC (typical EV range; can be configured)
Max Output Current: Up to 125 A (depends on voltage / connector configuration)
Charging Interface: Configurable (CCS2 / CCS1 / NACS / GB/T / CHAdeMO)
Number of Guns: Single / Dual (optional, project-based)
AC Input / Charging (Optional)
AC Charging Input: Configurable (single/three-phase options per project)
Charging Source: Grid / Generator / PV (optional integration)
System Efficiency
Overall System Efficiency: ≥95% (typical for power electronics path; project-dependent)
Cooling & Thermal Management
Cooling Method: Forced air (fan cooling) (typical for this size)
Environmental & Protection
Protection Grade: IP54 (typical for outdoor cabinet applications)
Operating Temperature: -20°C to +55°C (configurable)
Operating Altitude: ≤2000 m (typical)
Monitoring & Communication (Optional)
Connectivity: Wi-Fi / Ethernet / 4G (optional)
Remote Monitoring: EMS dashboard (SOC, power, alarms, logs)
Protocol Options: OCPP / Modbus (optional, based on operation mode)
Safety Functions (Typical)
Over/under voltage protection
Overcurrent & short-circuit protection
Overtemperature protection (battery + power modules)
Insulation monitoring / grounding protection
Emergency stop & fault isolation
Event logging & alarm history
Warranty
Standard Warranty: 3 years (configurable to project terms)
3) Typical Application Scenarios
Fleet Depot Support / Peak Charging
Buffer charging for fleet vehicles when site power is limited
Reduce peak demand and avoid transformer upgrades
Off-Grid / Remote Charging
Temporary charging in remote areas, mining sites, ports, logistics yards
Works with generator or renewable charging inputs
Emergency Response & Backup Power
Power restoration for critical loads + EV charging support during outages
Rapid deployment with minimal installation
Construction Sites
Power for site operations and charging for EV work vehicles
Lower noise and fuel logistics vs. diesel-only solutions
Events / Temporary Venues
Quiet, stable energy supply + optional EV charging for staff and logistics
Tags: mobile ev charge station